PT  |  ES
 

 
Cutters / 1217 C PL
Further informations
Main characteristics
Technical specifications
 
Retated products
Cutter 1217 C Pinfeed
Shingling conveyor 6018 B
Slitter Merger 2314
Paper Loop Control
Trim Chopper 9114
RTS Finishing system
1217 C
Continuous forms cutter with pinless kit
The cutter 1217 C PL was developed for customers that require large production without interruption. Its versatility allows a quick job changeover for both modes “PINLESS” and “PINFEED”. Together with Laurenti RTS product line it can meet the needs of the main application for PRE and POST electronic printing.

Illustrative picture to show the application with the cutter and the shingling conveyor model 6018B  
Main characteristics
• Provides single or double cuts
• Stores up to 20 programs
• Up to 10 different cutting lengths per program
• Adjustable in increments of 1/6”, 1/8” and 1/10”
• Barcode reader is optional
• Software includes advanced micro-controller technology
• Feed/Cut or Cut/Feed operation
• Margin and center slitter boxes
• Easy maintenance because of single board System
• Easy setup from Single blade to Double blade (about 10 seconds)
• Paper end sensor and, paper loop control, paper jam control
• Non-resetable counter (Total)
• Resetable counter (Partial)
• Preset counter with programmed pause or stop
• OMR control with programmed pause or stop
• Printer Interface
( Back to top )
Technical specifications
Dimensions Length 630 mm, Width 960 mm, Height 1270 mm, Weight 145 Kg
Power requirements 220 V AC +/- 5% (grounded), 60 Hz, 5 A, 780 W, 3073 BTU/h
Forms Length - from 3” (76 mm).
The maximum length depends on the feed pitch.
Width - from 3,5” (90mm) to 20” (508 mm)
Paper weight - from 75 g/m² to 150 g/m²
Application Feed pitch - 1/6”, 1/8” or 1/10” - PS.: The pinless kit requires an optical mark on the form for the feed pitch control

Productivity *
cuts / hour

* It may change according to the customer needs

Length 1/6”
76,2 mm (3”) - 29.280 cuts/h
101,6 mm (4”) - 26.400 cuts/h
152,4 mm (6”) - 22.320 cuts/h
203,2 mm (8”) - 19.440 cuts/h
254 mm (10”) - 17.280 cuts/h
279,4 mm (11”) - 16.320 cuts/h
304,8 mm (12”) - 15.360 cuts/h
( Back to top )
 
Home  About Laurenti  |  Contact  |  Technical Support  |  Site Map
© 2008 Laurenti Equipamentos para Processamento de Dados. All rights reserved.