|
|
CT 1217
Continuous forms cutter |
| The CT 1217 automatic cutter produces single sheets from continuous forms. It is generally positioned on finishing lines followed or not by a slitter merger.
The sheets can be dispensed on a horizontal conveyor coupled to the cutter, such as the CV 6018 model. The strip cuts and margin trims are processed by the Trim Chopper TC 9114. |
| Main characteristics |
• Provides single or double cuts
• Double sided (1/6" strip)
• Stores up to 20 programs
• Up to 10 different cutting height per program
• Program cutting heights by 1/6", 1/8" and 1/10"
• Bar code reader - optional
• Software includes advanced micro-controller technology
• Fast paper adjustment by feeding forms tractors
• Feed/Cut or Cut/Feed operation
• Margin and center slitter boxes
• Paper end sensor
• Paper loop control
• Paper jam control
• Non-resetable counter (Total)
• Resetable counter (Partial)
• Variable height stacking table with adjustable stack stops
• Preset counter with programmed pause or stop
• OMR control with programmed pause or stop
• Printer Interface
• Long blade lifetime (more than 8 million cuts)
• Easy maintenance because of single board System
• Easy setup from Single blade to Double blade (about 10 seconds) |
| Dimensions |
Length 630 mm,
Width 960 mm,
Height 1270 mm,
Weight 145 Kg |
| Power requirements |
220 V AC +/- 5% (grounded),
60 Hz,
5 A,
780 W,
3073 BTU/h |
| Forms |
Length from 1/10" (2,54 mm) to 25" (635 mm)
Width from 3,5 " (90 mm) to 20 " (508 mm)
Paper weight from 63 g/m² to 150 g/m²
Margin trim:
Mín. 10 mm / Máx. 25 mm |
| Productivity |
Distance between cuts - Single knife cut
76,2 mm (3") - 35000 cuts/h
101,6 mm (4") - 32100 cuts/h
152,4 mm (6") - 27060 cuts/h
203,2 mm (8") - 23400 cuts/h
254 mm (10") - 20760 cuts/h
279,4 mm (11") - 19680 cuts/h
304,8 mm (12") - 18540 cuts/h |
|
